2 inches of Ener-air exterior insulation
James Hardie siding in Boothbay Blue
New soffit, fascia, and eavestrough
Malarkey Class 4 impact-resistant roofing system
Lux entry doors
- Project Location: Edgebrook (Calgary)
- Completed by: EnerClear Exteriors (in partnership with Part Nine Design + Build)
- Project Scope: Full exterior renovation including stucco removal, structural repairs, exterior insulation, new windows, siding, and roofing
This Edgebrook project came to us through PartNine, a general contractor that specializes in high-energy-efficiency renovations. It was a good fit from the start. We both approach projects the same way: fix the root problem, not just what’s visible.
The home, built in the mid-90s, had started to show clear signs of failure in its exterior envelope. Crumbling stucco was the obvious issue, but once we began investigating, it became clear the problems ran much deeper. Water infiltration over time had led to rot in the wall assemblies, particularly at the rear walk-out level. Poorly sloped grading and weak stucco details had allowed moisture to do real structural damage.
This wasn’t a cosmetic renovation. It was a necessary reset.
Opening Up the Walls
We began by removing and disposing of all existing stucco, including several problematic architectural features around the front windows that were contributing to water issues. At the rear of the home, the chimney was removed entirely to allow for proper rebuilding and detailing.
Once everything was opened up, the extent of the damage was clear. Large sections of the lower rear wall had to be reframed due to prolonged moisture exposure. We completed extensive structural framing repairs and then properly waterproofed these areas to ensure the same issues wouldn’t return. This step is critical—there’s no point in putting a new exterior on top of a compromised structure.
Rebuilding the Envelope
With the structure corrected, we focused on rebuilding the exterior envelope properly. The home received Lux triple-glazed windows and patio doors, selected for their highest Energy Star ratings and performance in Calgary’s climate. New Lux entry doors were installed to complete the window and door package.
To significantly improve thermal performance, we added 2 inches of Ener-air exterior insulation across the home. From there, the exterior was finished with James Hardie siding in Boothbay Blue, complemented by Evening Blue feature accents. The colour combination gave the home a bold, modern look while still fitting naturally into the neighbourhood.
New soffit, fascia, and eavestrough completed the exterior system, improving ventilation and water management. To protect the home long-term, especially given the area’s exposure to summer hailstorms, we installed a Malarkey Class 4 impact-resistant roofing system.
Projects like this highlight the importance of addressing structure, water control, and performance together—not as separate upgrades.
Energy-efficient you can count on.
The Result
By the end of the project, the home had been completely transformed—inside the walls and out. The crumbling stucco and rot issues were eliminated, the structure was reinforced, and the exterior envelope was rebuilt to modern performance standards. The new siding, windows, and roofing didn’t just change how the home looked; they changed how it performed.
For me, this project is a perfect example of why exterior renovations need to go deeper than finishes. When moisture problems are ignored, they only get worse. When they’re addressed properly, the result is a home that’s stronger, more efficient, and built to last. This one was done right—and it shows.
